Archive

Posts Tagged ‘Part’

PV Performance vs Temperature – Part 6 – final wrap-up

January 5th, 2012

I do a final wrap-up of the testing between the amorphous and monocrystalline solar panels vs hot conditions. Getting ready to add a polycrystalline solar panel to the mix. Equipment used: Fluke 43b power analyzer Fluke 287 / 289 digital logging multimeter Major Tech MT22 digital multimeter WattsUp! power meter Outback Flexmax 60 MPPT solar regulator Setsolar mini grid tie inverter Temperature probe Fluke DC current clamp / probe Variable power supply Wire strippers 12 volt relay, double pole, double throw 55 watt amorphous solar panel 55 watt monocrystalline solar panel Infrared hand held digital thermometer with laser sighting Spin-off projects: Auxiliary load control / diversion from the Outback Flexmax using a solid state relay. Add solar power to my Fluke 287 / 289 Solar Powered UPS
Video Rating: 5 / 5

SOLAR POWER , , , ,

Larsen RADAX Hydrogen Powered Engine (Part 1/2) Explanation

December 30th, 2011

Mel Larsen has claimed that his Larsen RADAX engine has set the word record in thermal efficiency for an engine. The Larsen RADAX is an 8-cylinder, 2-stroke, 300 horsepower Internal Combustion Engine that has an efficiency range of 45 – 54 percent, which far exceeds the 20 – 30 percent efficiency of a standard gasoline engine.
Video Rating: 4 / 5

HYDROGEN , , , , , ,

How to Make an Inexpensive Vertical Wind Turbine – Part 1

December 24th, 2011

Kit for sale now- www.berezintechnologies.com Visit Blog at http for details on wind and other stuff I do. Part 2 is now done and covers power generation: www.youtube.com Harness the wind for less than 0. DIY vertical wind turbine of the Savonius style. Notable is that this cost less than 0 in materials so far and that the largest part of this turbine is recycled materials (the PVC drums previously held Balsamic Vinegar from Italy). Also, this turns well in a very light wind. Axle: 3 inch PVC piping from Home Depot Bearings: 5 inch lazy suzan from Lowes. Part 2 will cover power generation and connection to the battery bank.

www.WindEnergyGuide.net – Free Wind Power Generator Plans Instructions Free Wind Power Generator Plans Wind Generator Plans, Free DIY build wind generator plans, parts, workshops. Free plans. … Ready to install your own wind power system? Let us do the engineering or we can just Wind power generator and alternative energy – small scale homemade … · Science Small scale wind power generators for generating renewable green environmentally friendly energy. Diagrams, designs, and data are available for free. … Click here to see a summary of Eskom’s plans to dispose of nuclear waste safely …Free VAWT Wind Turbine Plans – Wind Feb 17, 2009 … Download the Free PicoTurbine Plans. PicoTurbine Windmill Plans – 27 page … Build a wind or water power system with around a PM Generator ..Chispito DIY Wind Turbine Plans – Wind May 18, 2006 … Make a simple, affordable DIY wind turbine generator. … Free VAWT Wind Turbine Plans Make your own 250 Watt vertical axis wind turbine Power Your Home With Free Wind Generator Plans Oct 30, 2008 … Power Your Home With Free Wind Generator Plans. … Power Your Home With Free Wind Generator Plans. 30 Oct. 2008. EzineArticles.com. ..DIY Wind Turbine Plans – Instructions Building Wind Turbine Jun 30, 2008 … All you need is a good set of diy wind turbine plans in order to … Solar Power Generation – Learn How You Can Make Free Power at Home! …Wind Power Generators — Windmills · Alternative Energy Inexpensive plans for a 9ft diameter
Video Rating: 4 / 5

WIND POWER , , , ,

Bobby Hemmitt: Explains The DarkSide Energy (1/11/04) Part 1 of 9

December 9th, 2011

This is a classic video where Bobby Breaks down the reason for The Dark Side, and how important it is to understand, and work with the Dark Side energy. He breaks down how it became so-called evil and how that’s false based on ignorance and religion. This is a Master Piece and a most great for anyone on their path. Panicpack@hotmail.com
Video Rating: 4 / 5

FUEL, ENERGY CONSPIRACY THEORIES , , , , , ,

Bobby Hemmitt: Explains The DarkSide Energy (1/11/04) Part 8 of 9

November 26th, 2011

This is a classic video where Bobby Breaks down the reason for The Dark Side, and how important it is to understand, and work with the Dark Side energy. He breaks down how it became so-called evil and how that’s false based on ignorance and religion. This is a Master Piece and a most great for anyone on their path. Panicpack@hotmail.com
Video Rating: 5 / 5

This is a classic video where Bobby Breaks down the reason for The Dark Side, and how important it is to understand, and work with the Dark Side energy. He breaks down how it became so-called evil and how that’s false based on ignorance and religion. This is a Master Piece and a most great for anyone on their path. Panicpack@hotmail.com
Video Rating: 4 / 5

FUEL, ENERGY CONSPIRACY THEORIES , , , , , ,

Stanley MEYER – Water Fuel Cell Part 4

November 26th, 2011
Comments Off

www.hydrowaterpower.com www.hydrowaterpower.com Molecular Dissociation of Water: A Project for the Experimenter by Dan Danforth In the original setup that Stan Meyer showed us, he used 36 volts as the basic potential applied to the reaction chamber. He also commented that stainless steel ( 410 not 403 ) was the only metal that could be used as oxides formed with all others. His original chamber used 18 inch long by 0.375 inch diameter (od) rod surrounded by 1 inch diameter (id) 16 inch long pipe. The reason for the difference in length is for mechanical ease of construction. My prototype used 14 inch long rod and 12 inch long pipe of similar diameters as the drawing indicates. Having a severe lack of parts diversity here in Sri-Lanka, I was only able to obtain a 24 volt. 8 amp transformer and built my circuitry around that. The final output is 20 volts with Ml reading 10 amps to the pulsing circuit which generates a symetricel squarewave ( 50% duty cycle ) to the flyback inductor connected in series with the chamber as the schematic shows. The flyback high voltage spike is directed across the chamber via c* end d*. The use of a high voltage spike alone, without the current being delivered through the liquid, will not cause the disassociation to take place. This I verified using an ignition coil in place of the inductor and applied the secondary with halfwave rectification and blocking capacitor to prevent burn out to the chamber with no results. Apparently the current in

FUEL, ENERGY CONSPIRACY THEORIES , , , , ,

AU 60 Minutes BP Oil Spill Video, 13 June 2010, Removed by BP Demand Part 2

November 15th, 2011

AU 60 Minutes BP Oil Spill Video, 13 June 2010, Removed by BP Demand Part 2 See Part 1: AU 60 Minutes BP Oil Spill Video, 13 June 2010, Removed by BP Demand Part 1 www.youtube.com If removed by YouTube get this Zipped file: cryptome.org (9.8MB)
Video Rating: 4 / 5

OIL DISASTERS , , , , , , ,

Slick Operators – BP Oil Spill part 2/4

November 9th, 2011

Slick Operators aired on a show called Scottish Eye on Channel 4 in the UK on January 20, 1990. As far as I can tell there is not another copy on the internet anywhere, not really any info about it either. This was a VHS copy that was given to a friend at a conference in Alaska in 1990, so the quality is what it is. It investigates BP’s role in the Exxon Valdez oil spill in Alaska and shows the companies history of cutting corners on safety to make more money. Things that were said to be impossible in the cover up of the Exxon Valdez spill were routine at an oil terminal in Scotland. Sorry about the weird length of the third clip, it was the entire show to upload without getting errors.
Video Rating: 5 / 5

OIL DISASTERS , , ,

How to build a Solar Panel $1 A WATT DIY SOLAR PANEL Part 6 humidity water solar test Buster

October 18th, 2011

Back encapsulation is the best option in my opinion. The advantage is, no need for expensive silicone encapsulants. The back encapsulation prevents much of the resin from UV exposure. These are dew safe water tight 100% The humidity is as bad as it can get where we live. If they do not get wet here, they are safe anywhere. Buster was about 3 years old when he wandered in the veterinarian’s office in early 1995 while our dog Sweetie was getting her yearly shots. We took him home:-) 16 great years. If not for the rare lymp cancer that started 5 months ago, he would have lived a few more years. He passed away while I was filming the foggy camera section of this video.
Video Rating: 4 / 5

This unit runs for free all day. Takes about 550 Watts. I use 9 Chinese grid tied inverter’s to power the house. I save about. 35% off my power bill.
Video Rating: 5 / 5

SOLAR POWER , , , , , , , ,

How Hydrogen Fuel Cell Cars Can Give You the Gas Mileage Improvements Part 1

October 14th, 2011

www.hydrowaterpower.com www.hydrowaterpower.com Gas prices may have dropped by a couple of cents over the last few days but with the current trends you can bet that it won’t be long before they go up yet again. The days of cheap oil and gasoline are sadly a thing of the past. So if you have any sense you should still be looking for ways to make gas mileage improvements on your vehicles by any means that you can. Along with the latest and most promising ways to improve gas mileage and get more mpg are the hydrogen fuel cell cars. Hydrogen fuel cell cars are just standard cars that have been converted to use water as a supplement to ordinary gasoline. This is achieved with the use of a DIY hydrogen fuel cell or (Homemade Hydrogen generator), a small device that provides HHO gas. This HHO gas is then mixed with the ordinary gasoline + air mixture in your cars engine. As this mixture of gases burns with a lot more efficiency and power it gives you fantastic gas mileage improvements. (Notice that I said “supplement” as there are some claims out there that suggest you can run your cars on water alone, which is ridiculous) Croatia, Zagreb, Grafton, Australia, Saudi Arabia, Riyadh, Spain, Madrid, Sri Lanka, Colombo, Taiwan, Taipei, Switzerland, Bern, Suriname, Paramaribo, Clearwater Florida USA, Blue Mountains, Australia www.hydrowaterpower.com www.hydrowaterpower.com

SOLD!!!
Video Rating: 0 / 5

HYDROGEN , , , , , , ,

Build Solar Panels DIY – How to Solder the solar cells part 4 Solar Cell Mounting.

October 3rd, 2011

This step works well for resins that are less expensive and do not tolerate extensive UV exposure. The tape filters the UV and also locks the cells in place. There are several UV resistant Duct Tapes and other power adhesive tapes on the market. I like standard White Strapping Tape

SOLAR POWER , , , , , , ,

$1 A WATT DIY SOLAR PANEL part 3 Encapsulation Resin Overview Wood Frame

August 20th, 2011

THIS IS PART 3 of the process including good priced resins and wood frame construction. PART 1 www.youtube.com PART 2 www.youtube.com

SOLAR POWER , , , , , , , ,

(chch earthquake song) EARTHQUAKES, DEBT, CONSPIRACY & OIL (part 2) by TRILLION

June 30th, 2011

so Whodunit? zip file with all images used within the video – coming soon. also check back here for new information as it comes to hand…
Video Rating: 5 / 5

FUEL, ENERGY CONSPIRACY THEORIES , , , , , , ,

BP Oil Spill Clean Up Technology Ideas – Part 6 (2010)

June 21st, 2011

June 9, 2010 www.amazon.com Watch the full hearing: thefilmarchived.blogspot.com The first attempts to stop the oil spill were to use remotely operated underwater vehicles to close the blowout preventer valves on the well head; however, all these attempts failed. The second technique, placing a 125-tonne (280000 lb) containment dome (which had worked on leaks in shallower water) over the largest leak and piping the oil to a storage vessel on the surface, failed when gas leaking from the pipe combined with cold water formed methane hydrate crystals that blocked the opening at the top of the dome. Attempts to close the well by pumping heavy drilling fluids into the blowout preventer to restrict the flow of oil before sealing it permanently with cement (“top kill”) also failed. More successful was the process of positioning a riser insertion tube into the wide burst pipe. There was a stopper-like washer around the tube that plugs the end of the riser and diverts the flow into the insertion tube. The collected gas was flared and oil stored on the board of drillship Discoverer Enterprise. 924000 US gallons (22000 barrels) of oil was collected before removal of the tube. By June 3, BP removed the damaged riser from the top of the blowout preventer and covered the pipe by the cap which connected it to a riser. CEO of BP Tony Hayward stated that as a result of this process the amount captured was “probably the vast majority of the oil.” However, the FRTG member Ira Leifer said
Video Rating: 0 / 5

OIL DISASTERS , , , , ,

BP Gulf Oil Spill Conspiracy part 2

June 3rd, 2011
Comments Off

15 MORE reasons why Oil Spill was NO ACCIDENT!!!
Video Rating: 0 / 5

FUEL, ENERGY CONSPIRACY THEORIES , , ,

Panacea’s Free Energy Suppression production (Part 1, Segment 12 of 53)

June 2nd, 2011
Comments Off

Panacea’s FREE energy suppression documentary researcher’s edition. Over 5 years of research has enabled us to collect over 10 hours of data to illustrate how bad the problem is and justify ours or ANY proposed solution. Panacea’s FREE energy suppression documentary (researcher’s edition) is material intended to help the media publish the information to the public. Alternative and suppressed FREE energy devices are needed to be disclosed to the public with a suppression script to educate and motivate them to all eyes on the cartels that would financially benefit from the suppression of this technology. This is to help achieve PUBLIC SOCIAL REFORM, safety, security, get endorsement and build consumer awareness and demand. If you know of a media program that can help the FREE energy community by the use of this subject matter please refer them to this page: www.panacea-bocaf.org Please help and promote this. Part 2 will have a more positive outlook with the logic for our proposed granted NON PROFIT research center to support all and counter the same mistakes that FREE energy under goes. This is archived educational footage – some you may have seen, alot you may have not. Featured in this video (Part 1, Segment 12) are the Tatra T87 (aerodynamics), Bios Fuel, Stan Meyer, Stan Meyer thermal explosive energy, Water spark plug, XOGen, and Yull Brown
Video Rating: 5 / 5

FUEL, ENERGY CONSPIRACY THEORIES , , , , , ,

nuclear energy part 2 fission

April 27th, 2011
Comments Off

Phenomenon: The Lost Archives – The Missing Secrets of Nikola Tesla Part 1 of 4

April 18th, 2011

A mystery surrounds Tesla. His contributions, which were great in many, have descended into obscurity. Why? Nikola Tesla was a humanitarian, a US patriot, and yes an unbridled genius. Though he has often been personified as the quintessential mad scientist. Perhaps his only real misdeed was being born ahead of his time. Tesla’s idea was to be able to provide power equally to all people on Earth. At this time there are 2 to 3 billion people on this planet that can’t go home at night and turn on the lights. The people that can’t are living in poverty. And Tesla saw that there was a division between that have and the have-nots. And he was determined to make electrical power equally available to all people on this planet…as a gift. This is the story of the man that time forgot and the US government which did no justice to him.
Video Rating: 5 / 5

Nikola Tesla spiritualism coincidence Atlantis truth obama new world order nwo bush Clinton Satanism HAARP haarp Illuminati Freemasons dmt psilocybin shrooms magic mushrooms psychedelics government lies control brainwashing fake truths chemtrails chem trails fluoride America conspiracy conspiracies ufo mysteries evidence weapons secret alien aliens mind control genetics murder killing ghost 666 shaman shamanism occult bizarre open your mind wake up Egypt Egyptian believe HOPE

FUEL, ENERGY CONSPIRACY THEORIES , , , , , , ,

How to Make an Inexpensive Vertical Wind Turbine – Part 2

April 3rd, 2011

Kit for sale now- www.berezintechnologies.com blog — http (more info) DIY vertical wind turbine of the Savonius style. Notable is that the largest part of this turbine is recycled materials (the PVC drums previously held Balsamic Vinegar from Italy and the generator is a recycled automotive alternator with magnets added). Axle: 3 inch PVC piping from Home Depot Bearings: 5 inch lazy suzan from Lowes. Part 3 will cover connection to the battery bank with charge controller www.berezin.com (My Blog with more info and photos on this and will contain DXF drawings of the gears and other components which can be made manually or with CNC)
Video Rating: 4 / 5

WIND POWER , , , ,

The fractional change of mass to energy in a fission reactor is about 0.1% or 1 part in a thousand. For each k?

March 26th, 2011
Comments Off

Question by Katelynn Felder: The fractional change of mass to energy in a fission reactor is about 0.1% or 1 part in a thousand. For each k?
The fractional change of mass to energy in a fission reactor is about 0.1% or 1 part in a thousand. For each kilogram of uranium that undergoes fission, how much energy is released? If energy costs three cents per mega joule, how much is this energy worth in dollars?

Best answer:

Answer by Corinna
1kg X 0.1= 0.1kg

0.1 kg = 100,000 mg

1 mg = 90,000,000,000 joules

100,000mg = 9,000,000,000,000,000 joules

9,000,000,000,000,000 / 1,000,000= 9,000,000,000 megajoules

If energy is 3 cents per million joules or megajoule

This would cost….

9,000,000,000 X 3 cents=

27,000,000,000 cents

If 100 cents = 1 dollar……

Then we are looking at 0,000,000

Give your answer to this question below!

NUCLEAR ENERGY, POWER PLANTS , , , , , , , , , ,